We independently review everything we recommend. When you buy through our links, we may earn a commission. Learn more›

Printer Size and Placement: Check Fit Before Buying

Measure a printer for your desk or shelf with clearance for trays, covers, and the scanner lid, so the machine fits and can still be opened and serviced.

Printer Size and Placement: Check Fit Before Buying Review
Printer Size and Placement: Check Fit Before Buying

To make a printer fit, measure the desk or shelf, then compare it with the printer’s stated width, depth, and height plus the extra space needed for the output tray, paper tray, scanner lid, and rear access. The listed dimensions are for the closed machine, and the printer needs more room when it is working.

Many buyers measure only the footprint and discover that the lid will not open under a shelf or that the paper tray sticks out into the room. This guide explains how to measure properly and plan clearance, so the printer fits and can be used and serviced comfortably.

Read the Dimensions Correctly

Product pages list width, depth, and height, often for the printer with trays closed. Some give a second set of numbers for operating dimensions with trays extended. Read the specification page for both. Check the weight too, because a heavy laser printer may need a sturdy surface. A desk or shelf should be rated for the load, and a printer vibrates during use.

Note the position of the control panel, the front door, and the power and cable connections. Some printers need space behind for cables and ventilation. Our printers and scanners category describes how sizes vary between laser, inkjet, and all-in-one models.

Measure the Space

Write the numbers down in a single list so you can compare them with the product page: available width, depth, and height, then the closed printer, then the open printer. Add a few inches of margin on each side so the machine is not wedged. If the printer will sit in a built-in niche, measure the opening at the front and at the back, since walls and furniture are not always square. People moving to a new place can keep the list for the next setup.

Measure the available width, depth, and height where the printer will sit. Include the height above the printer, because scanner lids and top-opening covers need room to lift. If a shelf or cabinet sits above, check the clearance with the lid fully open, and look at the maker’s drawing of the opening angle if given.

Also measure the surface depth. A printer that overhangs the edge of the surface is unstable. Check that the surface is level and that nothing blocks the vents. Mark the footprint with tape and place a box of similar size to get a feel for how it will look.

A Fit Calculation With Made-Up Numbers

Say a shelf is 20 inches deep and 18 inches high with a shelf above it. The product page lists a closed printer 16 inches wide, 15 inches deep, and 10 inches high. The same page says the output tray extends 6 inches and the scanner lid lifts about 9 inches. Rear clearance in the manual is 4 inches. Depth needed is 15 plus 4 behind, which is 19, so the printer fits in 20, but the output tray must extend into open air in front, so keep the front edge flush. Height needed with the lid open is 10 plus 9, which is 19 inches, and the shelf gives only 18. The lid will hit the shelf above, so choose a taller space or a different model. Run the same sums with your own figures.

Clearance for Trays and Covers

Plan clearance in each direction:

  • Front: space for the paper tray to slide out, and for the output tray to extend.
  • Top: space for the scanner lid and the top cover to open.
  • Back: space for cables and ventilation, and possibly a rear paper path.
  • Sides: space for ventilation and for reaching in to clear jams.

Manuals often list the minimum clearances around the printer, so look for the installation section. A laser printer needs more ventilation space than a small inkjet. If the printer sits inside a cabinet, make sure heat can escape, or choose another position.

Surface and Weight Checks

Check the surface rating before you set a heavy printer on it. Floating shelves, thin glass tops, and light stands may carry less than a printer plus a ream of paper and spare toner. Add the printer weight from the product page to the weight of supplies you plan to keep nearby. Press on the surface edge and look for flex. A firm cabinet top or a dedicated printer stand is a better home for a heavy laser, and a stable desk corner is fine for a light inkjet.

Where to Put It

Think about cables before you commit to a position. A printer connected by USB needs the cable to reach the computer, and a wired network printer needs a cable to the router. Even a wireless printer needs a power outlet within reach, ideally not through a long extension cord. Place the printer so cables run along the wall or under a tray, and so that you can unplug it without moving the whole desk.

Laser printers draw a burst of power when warming up, so avoid sharing a power strip with equipment that dislikes voltage dips. A grounded wall outlet is the better choice.

A printer needs its own surface when it is large. A dedicated shelf, a printer stand, or a low cabinet keeps the desk free and reduces noise near your ears. Place it within reach of a power outlet, and a network connection if you use wired. Keep the printer away from direct sunlight and heat sources, and avoid carpet that collects dust.

For a small home office, a compact inkjet or a small laser on a shelf nearby works well. For frequent use, keep the printer within arm’s reach, so retrieving pages is easy. If your desk is a standing desk, note that placing a heavy printer on a moving desk adds load, and a separate stand is better.

Plan for Paper and Supplies

A small drawer or shelf near the printer keeps spare supplies close and the surface clear. Store paper flat in its wrapper, away from windows and humidity, and keep spare cartridges in their boxes. If you use several paper types, label the boxes. A tidy supply spot saves time when the printer asks for more toner or paper and prevents the pile-up of cardboard that tends to build around printers.

Allow space to store paper, toner or ink, and spare cables. Many people forget the ream of paper beside the printer. If your printer has a large paper tray, check how far it extends and whether it blocks a path. Keep the manual and the box for warranty claims, and plan a place to put empty cartridges for recycling.

Noise, Vibration, and Heat

Distance helps with noise. A printer a few steps from your chair is much quieter in a call than one at your elbow. If you must keep it on the desk, look for a quiet mode, which slows printing to reduce noise, and use it during meetings. Feet or a thin mat under the printer reduce rattling, but do not block the vents or lift the printer so that it becomes unstable.

Printers vibrate and make noise, especially during startup and printing. A stable shelf with a thin mat can reduce the noise on hard surfaces. Heat from a laser printer can warm nearby items, so do not put it beside sensitive equipment or under a thin shelf. Read how we describe these practical details on the how we review page.

Who Should Check What

Check the delivery path too. Printers are bulky and some weigh as much as a small appliance, so measure doorways and stairs, and plan for two people when moving a large laser or an office all-in-one. Keep the original packing for a short while in case you need to return it, and lift by the handholds listed in the manual.

If you have a small desk, measure the closed and open dimensions and look for compact models. If you share an office, place the printer where people can reach it without blocking walkways. If you plan to place it in a cabinet, check ventilation and the lid clearance carefully. For options in different sizes, see the best printer guide.

Frequently Asked Questions

How much space does a printer need?

More than its listed footprint. Add room for the paper tray, output tray, scanner lid or top cover, rear cables, and ventilation, as the manual states. Measure the closed and open dimensions on the product page, and leave a few inches on each side for jam access and airflow.

Can I put a printer inside a cabinet?

Only if heat can escape and the lid and trays still open. Lasers need more ventilation space than small inkjets. Check the installation section of the manual for minimum clearances, keep the doors open during printing, and avoid enclosed shelves that trap heat.

Where is the best place to put a printer in a home office?

Within reach of a power outlet and your computer or network, on a stable surface with room to open trays and covers. A nearby shelf cuts noise at your desk. Keep it out of direct sunlight and away from carpet that collects dust.

Should I put a printer on my standing desk?

It is better to use a separate stand or shelf. A heavy printer adds load to the desk lift, and it vibrates when the desk moves. If you must, check the printer weight against the desk load rating and leave margin for your other equipment.

Final Thoughts

Treat printer fit as part of the purchase decision, not an afterthought. If two models suit your needs, choose the one that fits the space with room to open and service it.

Measure the closed printer, then add space for trays, lids, cables, and air. Check the weight against the surface, mark the footprint before the printer arrives, and put the machine where you can open it and reach inside. A few minutes with a tape measure keeps the printer from becoming a daily annoyance.

Related buying guides

About the author

BuyOnceChoice Editorial Team
BuyOnceChoice Editorial Team

The BuyOnceChoice Editorial Team researches durable products worth buying once. Our guides compare published specifications, warranty terms, expert review consensus, and verified owner feedback. We do not conduct our own product trials. See How We Review and our Editorial Policy for our standards.