We independently review everything we recommend. When you buy through our links, we may earn a commission. Learn more›

Laser Printer Paper, Cardstock and Labels Guide

Choose paper for laser printers by weight limit, finish, and tray path, and learn why only laser-rated labels and transparencies are safe in the fuser.

Paper for a laser printer should match the weight and media types listed in the printer’s manual, and special media such as labels and cardstock need to be rated for laser printing. A laser printer heats the page to bond toner, so unsuitable stock can curl, jam, or even melt inside the machine.

Most printers handle ordinary office paper without trouble. Trouble starts with heavier stock, adhesive sheets, and glossy coatings. This guide explains the limits, the safer choices for each type, and which tray path to use so you can print on thicker media without damaging the printer.

Why Laser Printers Are Pickier

A laser printer pulls the sheet through a path, transfers toner powder to it, and then passes it between a heated fuser and a pressure roller. The heat is high enough to melt the toner into the paper fibers. Anything on the sheet that cannot survive that heat, such as adhesives, plastic coatings, or some inks, can soften, release gas, or stick to the fuser. Cleaning that off can be difficult and sometimes means a service call.

That is the reason the rules for laser media are stricter than they are for inkjet. A sheet made for inkjet use may have a coating that melts in a laser printer. Always read the packaging for the words “laser” or “laser safe,” and follow the manual’s list of supported media. Safety note: if you smell burning or see smoke, switch off and unplug the printer and contact the manufacturer.

Paper Weight and Finish

Printers list a supported weight range for each tray, often given in pounds or grams per square meter. Ordinary office paper is at the lighter end. Heavier paper feels more like card. Stay inside the printer’s stated range for each tray, and note that the main tray usually has a narrower range than a manual or rear feed.

Finish matters too. Smooth, uncoated paper feeds reliably. Very rough paper can reduce toner coverage and print quality. Glossy and coated stocks can work only if made for laser printers, since regular glossy stock may not withstand the heat. Check humidity: damp paper curls and jams, and dry paper can cling in stacks. Store paper flat in its wrapper at room conditions.

Converting Weights Between Pounds and Grams

Paper packaging in the United States uses pounds for bond, cover, and index stock, while printer specs often list grams per square meter. The common equivalents are about 20 pound bond at 75 grams, 24 pound bond at 90 grams, 28 pound bond at 105 grams, and 32 pound bond at 120 grams. Cover stock is on a different scale, so 65 pound cover is about 176 grams and 110 pound index is about 200 grams. These are approximate, and the number printed on the package may be rounded. Convert the stock you plan to buy and compare it with each tray limit in the manual, remembering that the main tray often has a lower limit than the manual feed slot.

Cardstock and Heavy Stock

Heavy stock is where people get impatient, so a short routine helps. Start with a single sheet, print a plain page of text, and check that the toner is fixed: rub the print gently with a dry finger and see whether it smudges. If it does, raise the heavy media setting or reduce the weight of the paper. If the sheet curls badly as it leaves the printer, use the rear exit if your printer has one, since it gives a flatter path. Let printed cardstock cool and flatten before stacking it.

Cardstock works in many printers when it stays inside the weight limit and uses the right path. Use the rear tray or manual feed if the printer has one, since a straight path avoids tight curves that can crack or jam thick sheets. Feed one sheet at a time or a small stack, and set the media type in the printer driver to heavy so the fuser adjusts its temperature and speed.

Check the manual for the maximum thickness, and watch for toner that rubs off, which suggests the fuser setting is too low for the stock. Do not force stock that is clearly too thick. Our printers and scanners category describes how paper paths differ between models.

Labels and Adhesive Sheets

Label sheets deserve a short checklist before every job. Confirm the sheet is flat and has no lifting corners. Confirm that your software template matches the sheet layout, so that nothing prints across a gap and onto the backing. Print a plain paper copy first and hold it behind the label sheet against a light to check alignment. Remove any label that has started to peel before it goes into the printer, because a loose label can detach inside and stick to the roller.

Use only labels sold for laser printers. Their adhesive and backing are built to survive the fuser. Labels made for inkjet or for hand use may release adhesive or peel off in the machine, which can wrap around the fuser and be difficult to remove. Use full sheets only, since sheets with missing labels expose the backing and adhesive, and avoid reusing partly used sheets.

Feed labels through the rear tray when possible. Set the media type to labels, and print only once per sheet; do not run the same sheet through again, since heat can loosen the labels. Store label sheets flat and avoid humid or hot places that make them curl.

Envelopes, Transparencies, and Other Media

Pay attention to size as well. Small cards, narrow strips, and odd shapes can slip through the path or jam at the turn. Check the minimum and maximum dimensions in the manual, and use a carrier sheet only if the maker allows it. Printing on both sides of heavy stock may exceed what the duplex path can handle, so feed it manually for the second side if the manual permits.

Envelopes can work, but flaps and seams create thick edges, and glue may soften under heat. Use laser-rated envelopes if the manual lists them, choose plain styles without windows or metal clasps, and feed them as the manual shows. Windowed envelopes, unless rated for laser, may have film that melts. Transparencies must be sold for laser printers as well.

Photo paper made for inkjet does not belong in a laser printer. If you want photo prints, follow the manual for supported glossy media or use another printer.

A Trial Run Routine for Any New Stock

Before you load a full pack of anything new, run the same short routine. Print one plain text page on the new stock with the media type set to match. Check three things: does the sheet feed straight, is the toner fully fixed when you rub it gently with a dry finger, and does the page come out flat enough to stack? Then print a short run of five sheets. If the third check fails, switch to the rear exit or manual feed if the manual allows it. If the first or second fails, change the media type or choose a lighter stock. Note the result on the package so you reorder the same thing.

Setup and Troubleshooting

Match settings to the media. Choose the tray, paper size, and media type in the printer driver. If prints smear, increase the fuser setting through the media type, or check whether the stock is too heavy. If sheets jam at the exit, check whether the paper is curling, and consider turning the stack over or using fresher paper. If double feeds happen, fan the stack and clean the pickup rollers according to the manual. Always unplug and let the fuser cool before reaching into the path.

Who Should Use What

Keep a small stock of each type you actually use, in labeled bins, and avoid buying large cases of specialty media until you have confirmed it feeds well in your printer. A single sheet that works in one model may jam in another, so record the brand and weight that worked, and reorder the same one.

If you print documents, ordinary office paper in the right weight range works. If you make flyers, tickets, or cards, use heavy stock through the rear tray, and run a short trial on a few sheets first. If you print shipping labels or mailing labels, buy laser-rated sheets in a size your software supports. Skip fancy coated or adhesive media unless the maker explicitly supports it. For printer choices with flexible paper paths, see the best printer guide and how we review.

Frequently Asked Questions

What paper weight can a laser printer use?

Check the manual, because each tray lists its own range. Many home laser printers handle standard 20 to 24 pound office paper in the main tray and heavier stock through a manual or rear feed. Staying inside the stated range and setting the media type to match prevents most jams.

Can I print cardstock on a laser printer?

Often yes, if the stock is within the weight range in the manual and is made for laser use. Use the rear or manual feed for a straight path, set the media type to heavy, and print one sheet first. Check that the toner does not rub off.

Can I use inkjet labels in a laser printer?

No. The heat in a laser fuser can melt the adhesive or coating on labels made for other uses and leave residue on the rollers. Use only sheets sold as laser safe, feed full sheets, and print each sheet once. Check the manual for your tray path.

Why does my laser printer curl paper?

Heat from the fuser drives moisture out of the sheet, which can make it curl, especially with damp stock or thin paper. Store paper flat in its wrapper, try fresh paper, flip the stack, or use the rear exit if your printer has one. Check the media type setting.

Final Thoughts

Laser printers handle plain paper easily and cardstock with care, but heat makes special media risky. Follow the manual’s weight range, use laser-rated labels and envelopes, choose the straight path for thick stock, and set the media type to match. Those habits prevent most jams and protect the fuser.

Related buying guides

About the author

BuyOnceChoice Editorial Team
BuyOnceChoice Editorial Team

The BuyOnceChoice Editorial Team researches durable products worth buying once. Our guides compare published specifications, warranty terms, expert review consensus, and verified owner feedback. We do not conduct our own product trials. See How We Review and our Editorial Policy for our standards.