We independently review everything we recommend. When you buy through our links, we may earn a commission. Learn more›

Speakers for a Turntable: What Else You Need

A turntable cannot drive speakers alone. Learn the phono stage, built-in preamp and powered versus passive paths, with the wiring mistakes that cause hum.

To play a turntable through speakers you need a phono stage, which boosts the weak turntable signal, and an amplifier, which powers passive speakers. A turntable with a built-in preamp, a receiver with a phono input or powered speakers with a phono input can each supply part of the chain. Work out which part you already have, then buy only what is missing.

Why a turntable needs a phono stage

A turntable cartridge produces a very weak signal, much weaker than the output of a streaming box or disc player. The signal also follows a standard equalization curve that cuts bass and boosts treble during cutting. A phono stage, also called a phono preamp, boosts the weak signal and reverses that curve, so that the sound comes out balanced and at a normal level.

If you plug a turntable that lacks a preamp into a regular line input, the sound is faint and thin, with little bass. If you plug a turntable that has a built-in preamp into a phono input, the signal gets boosted twice, and the sound can distort. Both mistakes are common, and the cause is almost always a mismatch between the preamp and the input.

Step one: find out what your turntable has

Look at the back of the turntable and at the manual.

  • A switch labeled phono and line, or preamp on and off, means a built-in phono stage.
  • A model name with the word preamp, or a manual that mentions line output, suggests the same.
  • A plain pair of red and white jacks with no switch and a ground wire often means no preamp.
  • A USB output means that the turntable has a built-in converter, which usually includes a preamp.
  • A Bluetooth turntable includes its own electronics for sending sound to wireless speakers.

If you cannot tell, search for the model number and read the specification sheet, or ask the maker. Note whether the cartridge is moving magnet or moving coil, since the phono stage must support the type. Most entry level turntables use moving magnet.

Step two: choose where the phono stage lives

There are four common places for a phono stage.

LocationWhat it meansGood for
Built in to the turntableSet the switch to line, plug into any inputSimplest setup, no extra box
Built in to the receiver or amplifierPlug into the phono inputA system with a stereo receiver
Built in to powered speakersPlug into the speakers’ phono inputCompact desktop systems
Separate phono preampBetween turntable and a line inputUpgrades, or an amplifier with no phono input

Choose one location. Do not stack two. If your turntable has a preamp and you set it to line, plug into a line input. If you use a receiver with a phono input and the turntable preamp is off, plug into the phono input. Check the receiver manual for the cartridge type it supports.

Step three: pick the speaker path

There are two main paths for the speakers.

  • Passive speakers: need an amplifier or receiver, with speaker wire. This path is flexible and suits a system you want to grow. Our AV receivers category lists models, and some include phono inputs, though many home theater models drop them, so check the specification.
  • Powered speakers: include an amplifier, so you connect the turntable directly, or through a phono stage. Look for models with a phono input, or add a small preamp. The page for powered and passive speakers can help you compare.

A third path uses wireless speakers fed by a Bluetooth turntable. It is convenient, though sound quality and delay depend on the Bluetooth codec, and it limits upgrades.

For most listeners with space, a stereo receiver with a phono input and a pair of passive bookshelf speakers is the classic path. For a desk or a small room, powered speakers with a phono input and a turntable with a preamp is the simplest.

Cables and connections that matter

Use the cables supplied with the turntable when you can. The ground wire matters, since it reduces hum. Attach it to the ground post on the receiver or phono stage. If you hear hum, check that the ground wire is tight and that the turntable cables do not run beside power cords. Keep the turntable away from the subwoofer and the amplifier, since vibration can feed back and cause rumble.

RCA cables carry the signal. Short, shielded cables are fine. Avoid ground loops by plugging the turntable and the amplifier into the same power strip when the manual allows it, and use a safe, rated strip.

Mistakes that cause bad sound

  • Plugging a turntable into a line input without a preamp.
  • Using a double preamp, which distorts the sound.
  • Forgetting the ground wire, which causes hum.
  • Placing the turntable on the same shelf as a speaker or subwoofer.
  • Setting the tracking force or anti skate wrongly, which affects sound and record wear.
  • Choosing a speaker with no clear impedance match for the amplifier.

Speaker choices that suit vinyl

Vinyl listening favors clear midrange, balanced tone and good placement. Bookshelf speakers on stands suit small rooms. Floorstanding speakers add scale in larger rooms, and our best floor standing speakers page lists options. A subwoofer is optional for music. Choose the speaker for the room first, and match the amplifier to the speaker’s impedance and sensitivity.

A shopping order that avoids duplicates

1. Check the turntable for a preamp and a cartridge type.

2. Decide on powered or passive speakers.

3. If passive, choose an amplifier with the right phono input or add a phono stage.

4. Choose the speakers to suit the room and the amplifier.

5. Buy cables, a ground wire and any stands last.

This order stops you from buying two preamps or an amplifier that lacks a phono input. See our best AV receivers page if you want a receiver that also handles video.

Keeping the stylus and records in good shape

Keep records clean with a soft brush and store them upright in sleeves. Clean the stylus gently with a proper brush, from back to front. Follow the manual for tracking force and replacement intervals. A worn stylus damages records, so replace it as the maker advises.

Decision rules

  • Turntable with a built-in preamp and powered speakers with a line input: connect directly, set the switch to line.
  • Turntable without a preamp and a receiver with a phono input: connect to the phono input.
  • Turntable without a preamp and an amplifier without a phono input: add a separate phono stage.
  • Desk system: a turntable with a preamp and powered speakers.
  • Home theater receiver with no phono input: use a separate phono stage into a line input.

For how we weigh specifications, see our How We Review page.

Two sample setups

A first setup for a bedroom desk uses a turntable with a built-in preamp and a pair of powered bookshelf speakers. You set the preamp switch to line, plug the turntable into the speakers’ line input, connect the ground wire if the speakers have a ground post, and you are playing records within minutes. A second setup for a living room uses a turntable without a preamp, a stereo receiver with a phono input and passive bookshelf speakers on stands. You plug the turntable into the phono input, attach the ground wire, run speaker wire and set the receiver to the phono source. The second setup costs more and takes longer, and it gives room to add a second source or a subwoofer later.

Cartridge type and why it matters

Most entry level turntables use a moving magnet cartridge, and most phono inputs on receivers support it. A moving coil cartridge produces a weaker signal and needs a phono stage that supports it, which is usually a separate unit or a receiver that says so in the manual. If you plan to upgrade your cartridge later, check the type first. Buying a phono stage or receiver that supports the type you will use saves you from repeating the purchase.

Setting up the turntable itself

Place the turntable on a level, solid surface away from the speakers. Set the tracking force and the anti skate as the manual describes, and check that the belt, if any, sits on the pulley correctly. Level the platter with the adjustable feet. A well set up turntable on a steady shelf reduces rumble and skipping, and it helps the speakers sound cleaner than any change of speaker would.

Frequently Asked Questions

Can I connect a turntable directly to speakers?

Only to powered speakers that accept the turntable’s output. If the turntable has a built-in preamp, connect it to a line input on the speakers. If it has no preamp, the speakers need a phono input, or you need a separate phono stage in between.

Do I need a receiver for a turntable?

Not always. Powered speakers can work without a receiver, and a Bluetooth turntable can send sound to wireless speakers. A receiver or amplifier suits passive speakers and gives room to grow. Check that it has a phono input or add a phono stage.

What happens if I use two preamps?

The signal is boosted twice, which can cause distortion and harsh, loud sound. Use one phono stage in the chain. If the turntable has a preamp, set it to line and plug into a line input, or turn it off and use the receiver’s phono input.

Do home theater receivers have phono inputs?

Many do not, though some do. Check the specifications for a phono input and the cartridge type it supports. If the receiver lacks one, add a separate phono preamp and connect it to a line input.

Final Thoughts

Find out whether your turntable has a preamp, choose one place for the phono stage, then pick passive or powered speakers. Avoid double preamps, connect the ground wire and buy in a sensible order. A simple chain that fits the room sounds better than a complicated one.

Related buying guides

About the author

BuyOnceChoice Editorial Team
BuyOnceChoice Editorial Team

The BuyOnceChoice Editorial Team researches durable products worth buying once. Our guides compare published specifications, warranty terms, expert review consensus, and verified owner feedback. We do not conduct our own product trials. See How We Review and our Editorial Policy for our standards.