We independently review everything we recommend. When you buy through our links, we may earn a commission. Learn more›

Track vs Wheel Drive Snow Blowers: Slopes and Gravel

Tracks grip slopes and resist wheel slip, wheels turn easier and cost less. Match drive type to your driveway surface, grade and ice before buying.

Track drive snow blowers use rubber tracks instead of wheels, which spreads weight and grips better on slopes, ice and deep snow, while wheel drive machines are lighter, cheaper, turn more easily and suit flat, paved driveways. Choose tracks for steep or slippery drives and heavy snow, and wheels for modest slopes, easy turning and a lower price.

How the Drives Differ

A wheel drive machine uses rubber tires, often with aggressive tread, powered by a drive system with several speeds. You steer by pulling or pushing the handles, and many models let you release one wheel to pivot. Some have power steering, which lets you turn by squeezing a trigger to disengage one side. Wheels roll easily, are simple to repair and tires can be fitted with chains in some cases.

A track drive machine uses rubber belts, like small tank treads, powered by a drive wheel at each side. The track has a large contact area, so weight spreads over more surface. Tracks can be driven independently or with hydrostatic drive, which gives smooth speed control and easy turning on some models. Tracks add weight and cost, and they have extra parts to inspect.

Slopes and Traction

On slopes, traction is the limiting factor. Wheels can spin on ice or packed snow, especially if the machine is nose heavy with a full auger load. Tracks hold on better because more of the machine touches the ground, and they resist sliding sideways when you work across a slope. If your driveway slopes down toward the street or has a sharp incline near the garage, tracks give added control.

On gentle slopes, wheels with good tread and chains in some cases are enough. You can improve wheel traction by adding tire chains, using weights, or choosing tires with deeper tread, if the manual permits. Always read the manual for limits, avoid steep slopes and work up and down rather than across when the manual advises.

Think about what traction means in practice. A snow blower working up a slope must hold its position while the auger bites into snow and pushes the machine back. Heavy wet snow makes this worse, since the auger load rises. On the way down, the machine can push forward when you release the controls, so you need to keep control. Tracks reduce slip in both directions, which makes them safer on steep drives. If you rely on wheels, choose tires with deep tread, check tire pressure and consider chains or weights if the manual allows them. Do not work across steep slopes with a machine that is not designed for it, and do not try to correct a slide by pulling hard on the handles.

A useful check is to look at your driveway when it is icy. If you can walk it comfortably in winter boots without slipping, wheels probably work. If you need ice cleats to walk it, tracks deserve a closer look.

Gravel and Unpaved Drives

Gravel drives are hard on any machine, since stones can be thrown by the auger and the machine can dig in. Set the skid shoes to raise the housing above the surface, and keep the auger from touching stone. Tracks ride over rough surfaces with less digging, while wheels can sink into soft gravel or dirt. Wheels may spin on loose gravel under snow. Both types need correct skid shoe height and a careful first pass of the season, since you cannot always see where the gravel ends.

For gravel and dirt, the main factor is the clearance and the shoe setting. A two stage or three stage machine suits it better than a single stage, which can throw stones.

Prepare the surface in autumn. Mark the edges of the driveway with stakes so that you do not drive the machine onto the lawn when snow hides the edge. Rake loose stones back into place, and fill ruts. On the first pass of the season, go slowly and listen for stones hitting the housing. If stones are thrown, raise the shoes a little more. A gravel drive often loses material every winter, so plan to top it up each spring, and compact it so that the surface is firm. Frozen ground gives better support than soft soil, so a stable base helps both wheels and tracks.

Turning, Handling and Weight

Wheel machines turn easily, especially those with power steering, and they are lighter to push into storage and to load into a truck. Track machines are heavier and may turn more slowly, because both tracks resist skidding. Many people find tracks stable but need practice. Some tracked machines turn in place using separate controls for each track. If you have a tight turn area or cluttered yard, handling may matter more than traction.

Consider how you will store and move the machine. A tracked machine may be too heavy to lift into a van, while a wheel machine is easier to move over thresholds. Check the weight on the product page.

Cost and Upkeep

Tracked models cost more than wheel models of the same width, and replacement tracks are a larger expense than tires. Tracks need inspection for cuts and wear, correct tension and cleaning of the drive sprockets and undercarriage. Wheels need air pressure checks and tread inspection. Both need routine care of the engine, shear pins, skid shoes and belts. If you have a mild slope and a paved drive, extra cost for tracks may not pay off.

Plan for a service routine. Tracks should be checked for cuts, cracks, missing lugs and tension at the start of each season, and cleaned of ice and debris after use. Wheel drive machines need tire pressure checks and tread inspection. For both, keep an eye on shear pins, skid shoes and belts. If the machine will sit in a cold, damp shed, wipe it down, and keep tracks from freezing to the ground by storing the machine on a board or rubber mat.

Who Should Choose Which

  • Choose tracks: steep or icy driveways, deep snow, uneven or soft surfaces and heavy storms.
  • Choose wheels: flat or gentle slopes, paved drives, tight turning space and a lower budget.
  • Choose either with the right setup: gravel drives, using skid shoes and careful operation.

Common regrets also deserve a mention. Owners of wheel machines on steep drives wish they had chosen tracks after a slide. Owners of heavy tracked machines on flat drives wish they had chosen a lighter machine that is easier to maneuver. Owners of any machine on gravel often wish they had set the shoes higher on the first day. Choose for your hardest section of driveway, and treat the rest as easy by comparison.

Reading Specs That Affect Traction

Look at weight, track width or tire size and tread type, drive type such as hydrostatic or friction disc, number of forward and reverse speeds, and whether the machine has power steering. Check clearing width and engine size, since a heavy machine with a small engine may bog down. Look for adjustable skid shoes and a way to level the housing. Check warranty terms for tracks and drive parts.

Ice, Packed Snow and the End of the Driveway

The windrow left by a plow is often hard, icy snow that can stop a machine. Tracks give better bite on such snow, and a machine with a taller intake and an accelerator can break it up. Take narrow cuts, move slowly and clear in layers. Break the ice with a shovel first if needed. Spreading salt or sand ahead of time helps wheels, but check what the surface can handle.

Safety on Slopes and with the Chute

Work slowly on slopes and keep both hands on the controls. Avoid sudden turns that can tip the machine. Point the chute away from people and property, and shut off the engine and wait for all parts to stop before clearing clogs, never using your hands. Keep children and pets clear, wear boots with grip and follow the manual. See the snow blowers category, the best small gas powered snow blower roundup and How We Review.

Frequently Asked Questions

Are track snow blowers better than wheels on hills?

Usually, yes. Tracks spread weight over a larger area and resist spinning and sliding, which helps on steep or icy slopes. For gentle slopes and paved drives, wheels with good tread are often enough. Always follow the manual’s slope limits.

Can a track snow blower handle gravel?

Both types can if the skid shoes are set high enough and the machine is a two stage or three stage. Tracks ride over uneven gravel with less digging, but you still need to avoid throwing stones and watch the first pass.

Do track snow blowers turn slower than wheel drive?

Generally, yes. Tracks are heavier and grip more, which makes pivoting harder, though many tracked models have steering controls that make turning easier. Wheel machines with power steering turn more easily and are lighter to handle in tight spaces.

Are tracks worth the extra cost?

They are worth it for steep, icy, soft or uneven drives and for deep snow. For flat, paved driveways with moderate snow, wheel drive is usually enough. Compare the extra price and repair costs against your actual slope and conditions.

Final Thoughts

Pick tracks for traction on slopes, ice and soft ground, and wheels for lighter weight, simpler upkeep and easier turning on flat pavement. Set skid shoes for gravel, work carefully on slopes and follow the manual’s safety rules.

Related buying guides

About the author

BuyOnceChoice Editorial Team
BuyOnceChoice Editorial Team

The BuyOnceChoice Editorial Team researches durable products worth buying once. Our guides compare published specifications, warranty terms, expert review consensus, and verified owner feedback. We do not conduct our own product trials. See How We Review and our Editorial Policy for our standards.