How to Clean a Dishwasher and Prevent Odors
Learn how to clean a dishwasher part by part, with a weekly, monthly, and quarterly schedule and fixes for odor, film, and slow drains.
To clean a dishwasher, disconnect power, remove and rinse the filter, clear the spray arm holes, wipe the door gasket and edges, check the drain, and then run an empty hot cycle with a cleaner approved in your manual. Do the filter often, and the deeper parts monthly or quarterly.
Safety Before You Start
Disconnect power to the dishwasher before cleaning internal parts. Turn off the breaker or unplug the machine if it is plugged in. Water, electricity, and sharp edges mix badly, so keep your hands away from heating elements and pumps while they are hot. If the machine is hardwired, use the breaker. Wear gloves when handling filters and sump debris, since glass and bone fragments can be present.
Why Dishwashers Get Dirty
Food bits, grease, soap scum, and hard water minerals build up on filters, arms, and seals. The dishwasher wets everything, and any residue left on a warm, damp surface becomes odor. A dishwasher that smells is nearly always telling you that its filter, spray arms, or gasket need attention, and that scraping heavy debris before loading would help. Rinsing plates entirely is unnecessary on modern machines, but scraping chunks off helps keep the filter clear.
The Parts and How to Clean Them
Filter (every week or two)
Most dishwashers have a removable filter assembly at the bottom of the tub. Twist and lift it according to the manual. Rinse it under warm water, and use a soft brush and dish soap to remove grease and fibers. Check the fine mesh for holes or tears, and replace it if damaged. A clogged filter is the number one cause of poor cleaning and bad smells. After cleaning, make sure it is seated and locked in place.
Spray arms (monthly)
Remove the lower and upper spray arms if the manual shows how. Look at each hole for mineral scale or food. Use a toothpick or a small brush to clear them, and rinse the arm under running water. If the machine has a fixed upper spray, wipe the nozzles. Hard water scale shows as white crust, and a soak in diluted white vinegar can loosen it.
Door gasket and edges (monthly)
Wipe the rubber seal around the door with a cloth and mild soap, getting into the folds where grime hides. Wipe the inside edges of the door and the tub rim as well. Dry the gasket after cleaning, since standing moisture invites mildew.
Drain and sump (every few months)
With the filter out, look at the sump and drain opening for debris such as glass shards, seeds, and labels. Pull out any visible items by hand with gloves or with tongs. If water sits in the bottom after a cycle, check the drain hose for kinks and the air gap or high loop for clogs, which a licensed plumber can help with.
Racks and utensil baskets (quarterly)
Wipe racks and the silverware basket. Check for chipped coating where rust could start, and replace or repair it as the maker advises.
Detergent dispenser (monthly)
Wipe the dispenser and the rinse aid compartment. Dried detergent can block the door from opening properly. Refill rinse aid as needed.
A Cleaning Cycle Step by Step and a Simple Schedule
- Empty the dishwasher and remove the racks if you want to clean the tub.
- Clean the filter, spray arms, and gasket as above.
- Place a dishwasher-safe cup of white vinegar on the top rack, or use a cleaner the manufacturer approves, and run a hot cycle. Some makers advise against vinegar because it can affect rubber parts over time, so check the manual first.
- For stubborn film, run a second cycle with a cleaner designed for dishwashers, following the label.
- Do not mix vinegar and bleach or other cleaners, because the mix can release harmful gases.
- Wipe down the exterior and control panel with a soft damp cloth.
Run the cleaner cycle only after the filter, arms and gasket are clean. If you run it first, the loosened residue just settles back into a clogged filter. Check the manual for which cleaner and which cycle it names, and run the cycle with the tub empty apart from the cleaner cup.
A Simple Schedule
| Frequency | Task |
|---|---|
| — | — |
| Weekly | Scrape plates, rinse and check the filter |
| Monthly | Clear spray arm holes, wipe gasket, clean dispenser |
| Every three months | Check drain, run a cleaner cycle, wipe racks |
| Twice a year | Inspect hoses and water inlet for leaks |
Fixing Common Problems and What Not to Do
Odor
Clean the filter and gasket, run the hot cycle, and leave the door slightly open between uses to let the tub dry.
White film on glasses
This is often hard water minerals or too much detergent. Adjust the amount of detergent, add rinse aid, and clean the spray arms. Our guide on dishwashers and hard water covers fixes in more detail.
Slow or standing water
Check the filter, drain, and hose. If the problem persists, call a technician.
Greasy dishes
Run hot water at the sink before starting the cycle so the first fill is hot, and use a detergent designed for your water type.
See our dishwasher guides for models with filters that are easy to reach, the home appliances hub for other upkeep guides, and the How We Review page for how we judge upkeep claims.
What Not to Do
Some well-meant tricks cause damage. Do not use bleach on a stainless tub, since chlorine can pit the metal. Do not pour oven cleaner or harsh drain cleaners into the machine. Do not scrub the interior with steel wool, which scratches and invites rust. Do not run the machine with a crack in a rack coating, because exposed wire can rust and stain dishes. Do not mix cleaning products. And do not skip the manual, because makers differ on what cleaners are allowed, and using an unapproved product can affect your warranty.
Our home appliances hub lists related upkeep guides. Be careful with any drain work. If a clog sits beyond the sump, in the sink drain or the garbage disposal connection, you may need to clear the disposal knockout plug or the high loop. Those are plumbing jobs, and a licensed plumber is the safe route if you are unsure. If you see water leaking at the door, base, or hoses, stop using the machine and shut off the water supply before investigating.
Three Illustrative Examples
Picture a dishwasher that smells like old broth because the filter has gone months without cleaning. Pulling it out reveals grease and bits of paper label, and a warm soapy scrub plus one hot cleaner cycle ends the smell. Checking the filter every two weeks keeps it from coming back.
Now picture cloudy glasses blamed on the detergent. The spray arm holes turn out to be crusted with white scale. A vinegar soak, if the manual allows it, clears the holes, and adding rinse aid while trimming the detergent improves the glasses.
A third case is standing water after every cycle. The filter is clean, but the drain hose has a kink behind the machine and the high loop sags. Straightening the hose fixes it. In each case the answer was a part nobody had looked at before. These are illustrations, not reports of specific owners.
Decision Rules
- Light use, soft water: filter weekly, deeper clean quarterly.
- Hard water: use rinse aid or a softening strategy, and clean spray arms monthly.
- Large household or heavy cooking: filter weekly and run cleaner monthly.
- Unusual noise or leaks: stop, disconnect power, and call a professional.
- Standing water persists after cleaning: have the drain and pump inspected.
If you keep one habit from this guide, make it the filter. A two minute rinse every week or two prevents most of the odor, poor cleaning and drain complaints that send people looking for a technician.
Frequently Asked Questions
How often should I clean my dishwasher filter?
Every week or two for most households, and weekly if you cook heavily or do not scrape plates. A clogged filter is the number one cause of poor cleaning and bad smells. Twist and lift it as the manual shows, rinse it with warm water, scrub gently and check the mesh for tears.
Can I clean a dishwasher with vinegar?
Some makers allow a cup of white vinegar on the top rack for a hot cycle, and others advise against it because it can affect rubber parts over time. Check the manual first, or use a dishwasher cleaner it approves. Never mix vinegar with bleach or other cleaners.
Why does my dishwasher smell bad?
Usually food residue and grease on the filter, spray arms or door gasket, left on warm damp surfaces. Clean the filter and gasket, clear the spray arm holes and run a hot cleaner cycle. Leaving the door slightly ajar between uses lets the tub dry, which helps keep odors from returning.
Is it safe to put bleach in a dishwasher?
Generally avoid it. Chlorine can pit a stainless steel tub and damage rubber parts, and mixing it with vinegar or other cleaners can release harmful gases. Use the cleaner your manual approves. If you are unsure which products are allowed, check with the maker before you pour anything into the machine.
Final Thoughts: Filter First, Then Everything Else
Most dishwasher problems come from a clogged filter, scaled spray arms, or a dirty gasket. Disconnect power, clean those parts on a schedule, run a cleaner cycle, and keep the door ajar to dry. Follow the manual for approved cleaners.
Related buying guides
- Stainless vs Plastic Dishwasher Tubs: Does It Matter
- Appliance Warranty Checklist: What Covers What
- Built-In vs Portable vs Countertop Dishwashers