Grill Cleaning and Rust Prevention Schedule
Clean the grates after every cook, empty the grease tray often and deep clean each season. Learn tools, rust prevention and when a cover helps or hurts.
To clean a grill, brush the grates while hot after each cook, empty the grease tray regularly and do a deep clean of burners, flavor bars and the cooking box each season. Turn off the gas and let the grill cool before cleaning the inside. Rust prevention comes from keeping surfaces dry, oiled and covered with a breathable cover.
Safety first
Turn off the gas at the tank and let the grill cool before cleaning interior parts. Disconnect the tank before deep cleaning a gas grill, and never spray a cleaner on a hot surface or on a lit burner. Grease buildup can feed a fire, so clean the grease tray and drip pan often. Wear gloves, and keep cleaning chemicals away from food surfaces. Follow your manual, and use cleaners it permits.
After every cook
While the grill is still hot, close the lid and let it run a few minutes to burn off residue, then scrape the grates with a grill brush or scraper. Check the brush for loose bristles, since a bristle can stick to food, and replace a worn brush. A brush with no bristles, such as a coiled or scraper style, avoids this risk. Wipe the grates with a lightly oiled cloth to prevent sticking and rust.
Once cool, wipe the exterior and the side shelves with a damp cloth, and check the grease tray. A quick weekly habit keeps small mess from becoming a hard job.
A schedule by use
Frequent cooking calls for more frequent cleaning. Use this as a guide.
- After each use: brush the grates, wipe off drips, close the lid.
- Every few uses or monthly in season: empty and wash the grease tray or replace the liner, scrape the inside of the lid and the bottom of the cooking box, wipe the knobs.
- Each season, or after heavy use: remove the grates and flavor bars, clean or replace them, clean the burners and ports, scrape the firebox, wash the exterior and check the hoses.
- Before long storage: clean thoroughly, dry the grill and oil the grates and the metal parts lightly.
If you grill several times a week, move each step up. If you cook rarely, the seasonal deep clean still matters, because grease can turn rancid and attract pests.
Deep cleaning step by step
Disconnect the gas and remove the grates, the heat shields or flavor bars and the grease tray. Soak the grates in warm soapy water, then scrub and rinse. Scrape the firebox with a plastic or brass scraper, and let debris fall into the tray. Clean the burner tubes with a soft brush and use a straight wire or a pipe cleaner on burner ports so flames burn evenly, following the manual so you do not widen the ports. Check for spider webs and insect nests in the tubes, since they can block gas flow.
Wash the lid interior, since flaking residue is carbon, not paint. Scrape it lightly rather than letting it peel into food. Reassemble when dry and check for gas leaks with a soap solution before the first cook.
Rust prevention
Rust starts where moisture sits on bare metal. Keep grates dry and lightly coated with a high smoke point oil. Cast iron grates need seasoning with oil, like a skillet. Stainless steel resists rust better but can still stain and pit, especially near the coast or around salt. Painted or powder coated surfaces rust when chipped, so touch up chips with a high temperature paint the maker lists.
Dry the grill after rain or washing, and keep it in a spot with drainage and airflow. Wipe away salty or acidic spills right away. Check for rust at the welds, the bottom of the firebox and the legs, since these areas hold moisture. Light surface rust on grates can be scrubbed off and reseasoned, while structural rust on the frame means the grill needs replacing.
Covers, storage and seasonal care
A cover keeps rain, pollen and bird droppings off, but a poorly fitted or non breathable cover traps moisture and can speed rust. Choose a cover that fits, has vents and is made for outdoor use, and make sure the grill is dry and cool before putting it on. In a wet climate, a cover on a dry grill is better than none. In winter, you can store the grill in a shed or garage, with the tank stored outdoors upright, away from the house.
For gas grills, disconnect the tank, cover the burner openings if the manual advises to keep insects out and check hoses before the next season. Our best grill page and the grills and smokers category cover the options. For how we treat care claims see How We Review.
Tools and cleaners that help
Having the right tools on hand makes the routine quick enough that you will actually do it. A good brush or scraper is the main tool, and a plastic or wooden scraper protects porcelain and enamel surfaces. Keep a bucket, a soft cloth, a nylon brush, a putty knife and a pair of gloves. Use mild dish soap and warm water for most jobs. Degreasers made for grills can help with heavy buildup, but use them as the label directs, rinse well and keep them off burner parts and gaskets unless the maker approves. Avoid oven cleaner on grill parts unless the manual says it is safe for the finish, since harsh chemicals strip coatings and can leave residue that touches food.
Natural options such as a vinegar and water spray or a baking soda paste handle light grease and odors, but they will not remove thick carbon. Rinse everything you wash and let it dry fully before reassembly, because trapped water leads to rust and can cause spitting when the grill heats. Heat is the best cleaner for grates, which is why burning off residue before brushing works so well.
Charcoal, pellet and flat surface differences
Charcoal grills need ash removal after the grill cools completely, since ash holds moisture and rusts the bowl. Empty the ash catcher, and dispose of ash only when it is fully cold, in a metal container. Pellet grills need the firepot vacuumed, the grease management system cleaned and the hopper emptied or protected from moisture, since damp pellets swell. Check the manual for the intervals, which depend on use. Flat top surfaces are cleaned differently, with scraping and oiling right after cooking, and their care is covered in our flat top comparison in the grills section.
Pests, grease fires and other hazards
Grease buildup attracts animals and can feed flare ups. Clear the grease tray before it fills and replace liners as needed. If a grease fire starts, turn off the burners and close the lid, and do not use water. Keep a fire extinguisher suited to grease fires nearby, and check the label, and follow the manual’s guidance. Check for animals before lighting a grill that has been stored, since nests in burner tubes are a real problem on gas models.
A Quick Calendar to Print
- Weekly in season: brush the grates, wipe the exterior, check the grease tray.
- Monthly in season: wash the tray or replace the liner, scrape the lid and cooking box, inspect the hose for cracks.
- Each season: deep clean grates, flavor bars, burners, and firebox, then check for gas leaks with a soap solution before the first cook.
- Before storage: clean, dry, lightly oil the grates, and cover with a breathable cover.
Adjust the dates to your own use. A grill used every weekend may need the monthly tasks every two weeks, and one used a few times a summer can stretch them, but keep the seasonal deep clean either way.
Frequently Asked Questions
How often should I clean my grill?
Brush the grates after every cook, empty the grease tray regularly, and deep clean the burners, flavor bars, and cooking box each season. Grills used several times a week need these steps more often. Even a rarely used grill needs a seasonal deep clean because old grease can turn rancid and attract pests.
Is it safe to clean a grill with a wire brush?
It can be, but loose bristles can stick to food, so inspect the brush often and replace a worn one. A brush with no bristles, such as a coiled or scraper style, avoids the risk. Wipe the grates with a lightly oiled cloth afterward to prevent sticking.
How do I stop my grill from rusting?
Keep metal dry and lightly oiled, wipe away salty or acidic spills, and use a breathable cover that fits. Dry the grill after rain or washing, and touch up chipped paint with a high temperature paint the maker lists. Check welds, the firebox floor, and legs, where moisture collects.
Can I use oven cleaner on grill grates?
Only if the manual says it is safe for the finish. Harsh chemicals can strip coatings and leave residue that touches food. Mild dish soap and warm water work for most jobs, and grill specific degreasers should be used as the label directs, rinsed well, and kept off burner parts and gaskets.
Final Thoughts
A grill cleans most easily when you do a little after every cook, a moderate job monthly and a full job each season. Keep metal dry and lightly oiled, use a breathable cover and watch for rust at welds and the firebox floor.
Related buying guides
- Grill Materials Guide: Stainless Grades and Cast Iron
- Grill Size Guide: Cooking Area by Household
- How Long Gas Grills Last: Burners, Grates, Body