We independently review everything we recommend. When you buy through our links, we may earn a commission. Learn more›

HDMI vs DisplayPort vs USB-C for Monitors

Compare cable limits by resolution and refresh rate, learn why version numbers matter more than connector shape, and decide which monitor cable to keep.

For monitors, DisplayPort is usually the best choice for a desktop computer at high refresh rates, HDMI is the easy choice for TVs and consoles, and USB-C is best for laptops because one cable can carry video, data and power. What matters is the version of each connection, not the shape. Check that your computer, cable and monitor all support the resolution and refresh rate you want.

What Each Connection Does

HDMI is the common connection on TVs, consoles, streaming boxes and many monitors. It carries video and audio over one cable. It is found on nearly every display and graphics card.

DisplayPort is the connection built for computer monitors. It carries video and audio, supports high refresh rates and offers features such as daisy chaining several monitors from one port on supported hardware. Many desktop graphics cards have several DisplayPort outputs.

USB-C is a connector shape. It can carry video through a mode called DisplayPort alternate mode, and it can also carry USB data and power on the same cable. A USB-C port on a laptop may or may not support video, so look for a video or Thunderbolt symbol, or check the specifications. When it works, one cable can connect a laptop to a monitor, charge it and link a keyboard and mouse through the monitor’s USB hub.

The three are not equal competitors. They overlap, and the best choice depends on the devices you connect.

Versions Matter More Than Shapes

The same connector can come in several versions, and each version has a different bandwidth. Bandwidth decides which resolution and refresh rate the connection can carry.

ConnectionTypical limit at 4KNotes
HDMI 2.04K at 60HzCommon on monitors and older devices
HDMI 2.14K at higher refresh ratesNeeds support on the device and a rated cable
DisplayPort 1.24K at 60HzCommon on older cards
DisplayPort 1.44K at higher refresh rates, with compression on some setupsCommon on recent cards and monitors
USB-C with DisplayPort alternate modeDepends on the port and the monitorShares bandwidth with USB data on some setups

These are general figures. The monitor, the computer and the cable each set a limit, and the lowest of them wins. Check the product page for the exact version of each port. If a version is not listed, check the manual.

A lower version can still work, just at lower settings. For example, a monitor that supports a high refresh rate over DisplayPort may show only 60Hz over an older HDMI port.

Resolution and Refresh by Use Case

Choose the connection by what you want to display.

  • Office work at 1080p or 1440p and 60Hz: any of the three works, and the choice is about convenience.
  • 4K at 60Hz: HDMI 2.0, DisplayPort 1.2 or later and USB-C with video all work.
  • 1440p at high refresh rates: DisplayPort is a reliable choice, and HDMI 2.1 works if both devices support it.
  • 4K at high refresh rates: DisplayPort 1.4 or later, or HDMI 2.1, with devices and cables that support it.
  • Laptop with one port: USB-C with video, if supported, or HDMI.
  • Console or streaming box: HDMI, matching the monitor’s input.

If your computer outputs a signal that the cable cannot carry, the system may drop to a lower setting or show a flicker. Check the display settings after you connect.

Features That Depend on the Connection

Some features depend on the connection. Adaptive sync, which varies the refresh rate to match the content, is supported over DisplayPort on many monitors and over HDMI on newer ones. USB-C can carry power for charging the laptop, and the monitor lists the wattage it supplies. HDR support depends on the version and the monitor. Audio can travel over HDMI and DisplayPort to monitor speakers or headphone jacks. Multi monitor daisy chaining works over DisplayPort on supported hardware, and over Thunderbolt on some systems. Check each feature in the manuals of your devices.

Cable Quality and Length

Cables matter more at high resolutions and refresh rates. A cable that is too old or too long can limit the signal.

  • Use a cable rated for the version you need. Labels such as high speed or ultra high speed for HDMI, and the DisplayPort version for DisplayPort, help.
  • Prefer the cable supplied with the monitor when you have it.
  • Keep runs as short as practical. Long passive cables can lose signal at high bandwidth, and active or fiber cables help for long runs.
  • Avoid bending cables sharply at the connector.
  • Make sure the connector is firmly seated, with the latch engaged on DisplayPort.
  • For USB-C, use a cable rated for video and for the power you need. Some USB-C cables carry only charging and slow data.

If you see flicker, sparkles, black screens or a cap on the refresh rate, the cable is a likely cause. Try a different cable before you change settings.

When to Pick Each Connection

  • Desktop with a graphics card and a gaming or high refresh monitor: DisplayPort.
  • Console or TV: HDMI.
  • Laptop used at a desk with a docking monitor: USB-C.
  • Laptop with only HDMI: HDMI.
  • Two monitors on one computer: use whichever ports the card offers, mixing is fine if each supports your settings.
  • Long run: check the cable type, and consider an active cable.

If a monitor offers several inputs, connect the main computer to the one that supports the best settings, and use the others for secondary devices. Our monitors category lists models with their ports.

Troubleshooting Signal Problems

1. Confirm that the monitor is on the right input.

2. Reseat both ends of the cable.

3. Try another cable, port or device to isolate the problem.

4. Check the display settings for the resolution and refresh rate.

5. Update graphics drivers.

6. Check the monitor menu for a setting that limits the rate or the connection mode.

7. For USB-C, check that the port supports video and that the cable is rated for it.

8. If the problem remains, check the maker’s support page for known issues and firmware updates.

Which Cable to Keep

Keep the cable that came with the monitor, since it is matched to the monitor’s top settings. Keep a DisplayPort cable for desktop use. Keep one rated HDMI cable for consoles and TVs. Keep one good USB-C cable that supports video for your laptop. Label them, and store them together. Throw out or set aside cables that cause dropouts, since they will cost you time later.

If you must buy one cable, buy the one that matches the best connection your computer and monitor share, in a length that fits the desk without strain.

Who Should Choose What

  • Desktop users: DisplayPort for the main monitor.
  • Laptop users: USB-C for one cable convenience, if supported.
  • Gamers with consoles: HDMI.
  • Office users with basic needs: any connection, whichever is easiest.
  • Multi monitor users: DisplayPort or USB-C docks, after checking limits.

Read the how we review page for how we weigh specifications, and compare models in our best productivity monitor roundup.

A Worked Example

A designer with a laptop wants a 4K monitor at 60Hz and one cable to the desk. The laptop’s USB-C port lists video support, and the monitor offers USB-C input with charging. The designer uses a USB-C cable rated for video and power, and sets the display to 4K at 60Hz. A gamer with a desktop and a high refresh monitor uses a DisplayPort cable from the graphics card, and checks that the refresh rate option appears in the settings.

How to Read the Spec Sheets

Open the monitor’s specification page and write down each input with its version, the maximum resolution and the maximum refresh rate for that input. Do the same for the computer’s outputs. Then pair the best output with the best input, and check that the cable in your hand matches the version. If the monitor lists a higher refresh rate on one input only, that is the input to use for your main computer. If the page lists no version at all, the manual or the maker’s support site usually does. A few minutes with these numbers prevents most of the signal problems people blame on the monitor.

Common Mistakes

Plugging a monitor into the wrong port on a desktop, such as the motherboard output instead of the graphics card. Assuming that any USB-C port carries video. Using an old cable that came with a different device. Skipping the display settings after connecting. Each mistake has the same remedy: check the version, the port and the setting.

Frequently Asked Questions

Is DisplayPort better than HDMI for a monitor?

For a desktop computer at high refresh rates, DisplayPort is usually the better choice, since it supports high bandwidth and monitor features widely. HDMI is fine for most office work and is the right choice for TVs and consoles. Check the versions on both ends.

Can USB-C replace HDMI for a monitor?

Yes, if the laptop’s USB-C port supports video and the monitor accepts it. One cable can carry video, data and power. If the port carries only data, you need HDMI or a dock. Check the specifications of both devices.

Why is my monitor stuck at 60Hz?

The cable, port or setting is probably limiting it. Use a cable rated for the bandwidth, connect to a port that supports the higher rate, select the rate in the display settings and update the drivers. Check the monitor’s menu for a limit.

Do I need an expensive cable for 4K?

No, but you need a cable rated for the version and bandwidth. A well made rated cable works. Very long runs may need an active cable. If you see flicker or dropouts, try another cable before you assume the monitor is at fault.

Final Thoughts

Match the connection to your devices: DisplayPort for desktops and high refresh rates, HDMI for TVs and consoles and USB-C for laptops. Check versions, use rated cables and keep the right cable for each job. The lowest limit among the computer, cable and monitor decides what you get.

Related buying guides

About the author

BuyOnceChoice Editorial Team
BuyOnceChoice Editorial Team

The BuyOnceChoice Editorial Team researches durable products worth buying once. Our guides compare published specifications, warranty terms, expert review consensus, and verified owner feedback. We do not conduct our own product trials. See How We Review and our Editorial Policy for our standards.