We independently review everything we recommend. When you buy through our links, we may earn a commission. Learn more›

Shed Permit and Setback Checklist

Rules on size, height, setbacks and foundations differ by town, county and HOA. Work through this checklist before you buy or place a shed.

Shed permit requirements depend on your city or county, but most places ask for a permit when a shed exceeds a size limit, has electricity or plumbing, or sits on a permanent foundation, and nearly all places set setbacks from property lines. Use the checklist below to find out what applies before you buy, call your local building or zoning office, and get answers in writing.

Why Rules Vary

There is no national shed rule. Permit thresholds, setbacks, height limits and foundation requirements are set by the city or county, and sometimes by a homeowners association or deed restrictions. Some places exempt small sheds below a size limit, often somewhere in the range of 100 to 200 square feet, and others require a permit for any structure. Coastal, wildfire, flood and snow regions often add extra rules. Because limits change, rely on your local office rather than a general guide, including this one.

Look for three kinds of rule when you read your local code. First, zoning rules, which control where a structure can sit, how tall it can be and how much of the lot it can cover. Second, building code rules, which control construction, foundations, wind and snow loads and electrical work. Third, private rules from an HOA or a deed, which can be stricter than either. A shed can pass one and fail another, so ask about all three before you pay for delivery.

Start with the Right Office

Begin with the building or planning department for your city or county. Ask for accessory structure rules, which is the term many codes use for sheds. If you live in an HOA, read the covenants and ask the board for approval in writing, since HOA rules can be stricter than the city’s. Check your deed and any easements, because utility easements prohibit building in certain areas. If you rent, get your landlord’s permission.

When you call or visit, bring your address, a photo or the dimensions of the shed you plan to buy and a rough sketch of where it will go. Ask which departments review sheds, because some places split zoning, building and fire reviews, and it is easy to clear one and miss another. Ask whether you can get a pre application meeting or an over the counter review for small structures. Many offices publish a handout for accessory structures on their website, so search for that phrase along with your city name.

The Checklist

Use this list before you order:

  • Confirm if a permit is required for your shed size, height and use.
  • Ask for the maximum allowed square footage and height for accessory structures.
  • Ask for setbacks from the side, rear and front lot lines and from your house.
  • Ask whether the shed can be on a gravel pad, skids or slab, or whether a permanent foundation is required.
  • Ask about wind and snow load requirements and anchoring rules.
  • Ask if electrical, lighting or plumbing needs separate permits and inspections.
  • Check HOA rules and deed restrictions.
  • Call 811, the national call before you dig number, before excavating.
  • Ask how long approval takes and what documents are needed.
  • Keep copies of every approval and the final inspection.

Setbacks and Property Lines

A setback is the minimum distance between the shed and a lot line or structure. Rear and side setbacks for sheds are often smaller than for houses, commonly a few feet, but this varies widely, and corner lots usually have stricter rules. Measure from the lot line, not from a fence, since fences may not sit on the true boundary. If you do not know where your line is, check the plat or survey, or hire a surveyor. Eaves, doors that open outward and attached ramps may count toward the setback measure in some codes.

Mark the shed footprint with stakes and string, then measure the distance to each lot line, the house, other buildings, overhead lines, septic tanks and wells. Some codes also keep sheds out of drainage easements, floodplains and critical root zones of protected trees. Photograph the staked layout with a tape measure in view, since photos help if there is a question later. Keep in mind that a shed placed exactly at the minimum setback leaves no margin for error, so leave a few extra inches.

Call Before You Dig

Call 811 a few days before any digging. Utility companies mark buried lines for free, which prevents damage and injury. Do not dig until the lines are marked, and keep the markings visible. This is relevant even for a shallow base, because some lines run shallow.

Electrical, Plumbing and Use

Adding power, lights or water usually triggers permits and inspections, and electrical work should be done by a licensed electrician. A shed used as an office, workshop or living space can be treated differently from storage, and may need to meet building and fire codes. Do not run an extension cord to the shed as a permanent solution, and do not store fuel or chemicals inside without following the container labels and local fire rules.

Foundation, Anchoring and the Build

Some places require a specific foundation, anchoring for wind or a frost depth footing. Others allow a simple gravel pad. Ask what the inspector will look for, and follow the manual and local code. If the inspector requires a stamp or engineering for the shed, ask early because kit makers may provide documents. Follow the shed manufacturer instructions so the warranty stays valid.

Plan the order of work. Get approval first, call 811, prepare the foundation, then assemble the shed. If an inspection is required, ask when to schedule it: some inspectors want to see the foundation before the shed goes on, and others want to see the finished anchoring. Keep the shed delivery date flexible until you have the permit, because a delivery that arrives before approval can leave you with a shed in the driveway and a delay. Save the permit, the inspection records and the receipts together in one folder.

A Quick Call Script

Say: I plan to place a prefabricated storage shed of a certain size in my backyard. What are the rules for accessory structures at my address? Do I need a permit? What are the setbacks and height limits? Are there foundation or anchoring requirements? Is electrical work covered by a separate permit? Ask them to send the answer by email, and write down the name of the person and the date.

What a Site Plan Usually Shows

If a permit is needed, you may submit a simple site plan. It usually shows lot lines, the house, driveways, easements, the proposed shed with dimensions and distances to each lot line, and sometimes the foundation type and the shed’s height. Many offices accept a hand drawn plan on a copy of your survey. Ask for their sample.

Common Reasons Permits Are Denied or Sheds Are Moved

  • The shed sits inside a setback or easement.
  • The shed is larger or taller than allowed.
  • The plan misses required documents.
  • An HOA objected or did not approve.
  • The build began before approval.
  • The foundation or anchoring did not meet code.

Insurance, Resale and Neighbors

Tell your insurer about a new shed and ask whether contents are covered. An unpermitted shed can cause trouble when you sell, because buyers or inspectors may ask for records. Talk with neighbors about placement, drainage and sightlines before you build, since a friendly conversation prevents disputes. For shed choices, see the storage sheds category and the best outdoor resin storage shed roundup. Our process is at How We Review.

Keep a one page summary of the project: permit number, approval date, setback measurements and the contact at the building office. If a neighbor, a lender or a future buyer asks, you can answer in minutes. If your shed is on a slab or has power, add the inspector’s sign off to the folder. Ask whether the permit expires if work does not start within a set period, because many do, and whether changes to the plan, such as a larger shed, need an amended permit.

Frequently Asked Questions

Do I need a permit for a shed?

It depends on your city or county. Many places exempt small sheds under a size limit, often between 100 and 200 square feet, but require permits for larger ones, for permanent foundations or for electrical work. Call your local building office to confirm.

How far from the property line does a shed need to be?

Setbacks vary by location, commonly a few feet from side and rear lines, with stricter limits on corner lots or in front yards. Ask your local zoning office, measure from the true lot line and check HOA rules and easements.

Do I need a permit to add electricity to a shed?

Usually yes. Electrical work typically requires a permit and an inspection, and a licensed electrician should do it, since mistakes can cause shocks and fires. Ask your local building office about the rules for lighting and outlets, and avoid permanent extension cords as a workaround, because they are not designed for continuous outdoor use.

What happens if I build a shed without a permit?

Consequences vary, but they can include fines, a stop work order or an order to move or remove the shed. An unpermitted structure can also complicate insurance claims and a home sale, because buyers may ask for records. Ask the local office before building and get the answer in writing.

Final Thoughts

Check local rules before you buy: permit thresholds, setbacks, foundation requirements, HOA covenants and utility lines. Get answers in writing, call 811 before digging and use a licensed electrician for any power. A short call now is cheaper than moving a shed later.

Related buying guides

About the author

BuyOnceChoice Editorial Team
BuyOnceChoice Editorial Team

The BuyOnceChoice Editorial Team researches durable products worth buying once. Our guides compare published specifications, warranty terms, expert review consensus, and verified owner feedback. We do not conduct our own product trials. See How We Review and our Editorial Policy for our standards.